ASSEMBLING
1.Open the package and take out the air cooler.
2.Draw out the water tank
pour clean water into the tank.
please pay attention to the water lever.
Pour into the water over MIN. level but no more than MAX. Level
to en-have the cooling effect, you can put the cold ice box into the tank.
3.Check the power, and ensure they are same as the rating label.
Attention: cut the power when you pour the water into the tank.
OPERATION
Put plug in the socket, Power indicator light reminding this products in
standby mode. Turn on "
” button ,default setting is in middel speed, Turn
it again, products in standby .
1. Speed key
: Press this key, automatically starting from mid ,high ,low
2. Mode key
“
”,default setting is in normal wind. Press this key,
automatically setting from normal wind, natural wind, sleep wind
3.Swing key
: press this key, the wind direction can swing flatly, and the
swing indicator light is on. Press again to cancel the function
Swing the blades transversely by your hands, choosing the wind direction up
an down.
4. Timer key
: press this key, the timer from 0 to 8 hours, each pressing
1hour.
5. Cooling key
: press this key, start this function, and if you add the
freezing ice crystal box in the water tank,air blow out temperature will much
more cooling. It cancels this function when you press again.(make sure water
level is above min.line)
6. Humidification
:press this key, it only can start cool air under low air
speed(make sure water level is above min.line)
7. Anion key
: Press it to make the room air fresh, if no need this
function ,press it again .
