6
EN: BREAD MAKER |
Instruction Manual
Delay time show on LCD= time you want to complete - current time
KEEP WARM FUNCTION
Bread can be automatically kept warm for 1 hour after baking. LCD will show 0:00 During keeping warm, “
▶
“ indicates to
KEEP WARM until 60min keep warm time complete.
ENVIRONMENT
Suggest the room temperature should be within the range of 15 °C to 34°C to use the appliance. The bread ferment will turn
acid if the temperature too high, if too low will effect the bread rising. Difference environment temperature, the bread size
may have difference.
MEMORY
If the power supply has been interrupted during the course of making bread, the process of making bread will be continued
automatically within 10-15 minutes, even without pressing START/STOP button. If the interruption time exceeds 10-15
minutes, the memory cannot be kept, you must discard the ingredients in the bread pan and add the ingredients into bread
pan again, and the bread maker must be restarted. But if the dough has not entered the rising phase when the power supply
breaks off, you can press the START/STOP directly to continue the program from the beginning.
WARNING DISPLAY
”HHH”
-This warning means that the temperature inside of the bread pan is too high. Press START/STOP button(see below
figure1)to stop the program, unplug the power cord, open the top lid, and let the machine cool down completely for
10-20minutes before restarting.
”EE0”-
This warning means that the temperature sensor is disconnected. Press START/STOP button(see below figure2) to stop
the program, unplug the power cord. Please check the sensor by the nearest authorized service agent for examination, repair
or electrical /mechanical adjustment.
Figure 1
Figure 2
BEFORE THE FIRST USE
The appliance may emit a little smoke and/or odor when you turn it on for the fist time. In manufacture it is necessary to
lightly grease some parts of the appliance. This is normal .
1.
Clean all the parts according to “CLEANING AND MAINTENANCE”.
2.
Set the bread maker on bake mode and bake empty for about 10 minutes. Or put 200ML water into the bread pan to
bake for 10 minutes. This action in order to subside the smell of the heating element and bread pan. Beep will be heard
after complete.
3.
3Unplug then let it cool down and clean all the detached parts again.Make sure the appliance has sufficient ventilation.
OPERATION INSTRUCTIONS
1.
Place bread pan in the bread maker, press downward. Place kneading paddle on shaft, pushing down as far as it will go,
