Holzstar ZSM 560, Instruction Manual

Page: 22 / 32

22 ZSM 560 | Version 1.01
Disposal, recycling of old equipment
14.5 Installation grinding rollers
(Accessories)
Please note that when changing to other grinding rollers,
the chip scraper (Fig.32) must be removed!
Step 1: Switch off the machine and disconnect the power
plug.
Step 2: Loosen the M5X20 screws securing the drum
cover and chip scraper..
Fig. 31: Open cover
Step 3: Remove the chip scraper.
Fig. 32: Remove chip wiper
Step 3: Remove the grinding roller.
Step 4: Mount the new grinding roller using the two
screws and nut.
Fig. 33: Insert grinding roller
15 Disposal, recycling of old
equipment
In your own interest and in the interest of the environ-
ment, please ensure that all components of the machine
are disposed of only via the designated and approved
channels.
15.1 Decommission
Discarded devices must be taken out of service immedi-
ately in a professional manner in order to avoid later mi-
suse and the endangerment of the environment or persons.
Step 1: Remove all environmentally hazardous operating
materials from the old machine.
Step 2: If necessary, dismantle the machine into mana-
geable and recyclable assemblies and compo-
nents.
Step 3: Route the machine components and operating
materials to the designated disposal channels.
15.2 Disposal of electrical equipment
Please note that electrical equipment contains a variety of
recyclable materials as well as components that are harm-
ful to the environment. Help to ensure that these compo-
nents are disposed of separately and properly. If in doubt,
please contact your municipal waste disposal service. If
necessary, enlist the help of a specialized disposal com-
pany for reprocessing.
15.3 Disposal of lubricants
The disposal instructions for the lubricants used are pro-
vided by the lubricant manufacturer. If necessary, ask for
the product-specific data sheets.
15.4 Disposal via municipal collection
points
Disposal of used electrical and electronic equipment
(Applicable in the countries of the European Union and
other European countries with a separate collection sys-
tem for these appliances).
The symbol on the product or its packaging indi-
cates that this product should not be treated as normal
household waste, but must be returned to a collection
point for the recycling of electrical and electronic equip-
ment. By helping to properly dispose of this product, you
are protecting the environment and the health of others.
Environment and health are endangered by improper
disposal. Material recycling helps to reduce the con-
sumption of raw materials. For more information about
recycling this product, contact your local community, mu-
nicipal waste management, or the shop where you pur-
chased the product
Screws
Chip wiper
Screws