Introduction
ZSM 560 | Version 1.01
3
1
Introduction
You have made a good choice by purchasing the Cylin-
der sanding machine made by HOLZSTAR.
Thoroughly read the operating instructions before
commissioning the machine.
It informs you about the proper commissioning, the in-
tended use as well as the safe and efficient operation
and maintenance of the Cylinder sanding machine. The
operating instructions are part of the Cylinder sanding
machine. Always keep it at the place of use of the Cylin-
der sanding machine. Furthermore, the local accident
prevention regulations and the general safety notes are
applicable for the field of application of the Cylinder san-
ding machine. The illustrations in these operating in-
structions serve the general comprehension and may
deviate from the actual type.
1.1 Copyright
The contents of these instructions are copyright. Their
application is admissible in the frame of the device. An
application beyond the described application is not allo-
wed without written approval of the manufacturer.For the
protection of our products, we shall register trademark,
patent and design rights, as this is possible in individual
cases. We strongly oppose any infringement of our intel-
lectual property.
1.2 Customer service
Please contact your dealer if you have questions on the
machine or if you need technical advice. They will help
you with specialist information and expert advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax:
0049(0)951 96555-111
E-Mail:
Internet:
www.holzstar.de
Spare part orders:
Fax:
0049(0)951 96555-119
E-Mail:
We are always interested in valuable experience and
knowledge gained from using the application, which then
could be shared and be valuable to develop our products
even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised taking the applicable standards and
rules, the state-of-the-art and our long-term knowledge
and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff,
- Unauthorised modifications
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications. The obligations
agreed in the delivery contract, the gen-eral terms and
conditions as well as the delivery conditi-ons of the ma-
nufacturer and the legal regulations at the time of the
conclusion of the contract are applicable.
2
Safety
This paragraph will give you an overview of all important
safety packages for the protection of the people using it
well as for a safe and undisturbed operation. Other task-
based safety notes are included in the individual chapters.
2.1 Symbol explanation
Safety instructions
Safety instructions are identified in these operating instruc-
tions by symbols. The safety instructions are introduced by
signal words that express the extent of the hazard.
DANGER!
This combination of symbol and signal word indicates
an imminently hazardous situation which, if not avoi-
ded, will result in death or serious injury.
WARNING!
This combination of symbol and signal word indicates
a potentially dangerous situation that can lead to
death or serious injury if not avoided.
Summary of Contents for ZSM 560
Page 1: ...Instruction Manual Cylinder Sanding Machine ZSM 560 ZSM 560 Vario ZSM 560 ZSM 560 Vario ...
Page 27: ...Spare parts ZSM 560 Version 1 01 27 Spare parts drawing 2 Fig 35 Spare parts drawing 2 ...
Page 29: ...Spare parts ZSM 560 Version 1 01 29 Spare parts drawing 2 Fig 37 Spare parts drawing 2 ...
Page 32: ...www holzstar de ...