SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
29
TS315F1600
12.3
Safety devices
The machine is equipped with the following safety devices:
A self-locking EMERGENCY-STOP button to stop
dangerous movements at any time.
Safety guard (adjustable): saw blade protection
Interlocking movable guard:
Saw blade cover (2) (secured with bolts and
equipped with a safety switch (1))
This safety switch interrupts the power supply
immediately when the saw blade cover is re-
moved.
Riving knife
This measure is intended to prevent the work-
piece from kick back. The setting is in horizontal
and vertical direction opposite to the saw blade.
Push stick
For cutting operations where less than 120mm
is cut, i.e. less than 120mm distance to the
right of the saw blade to the rip fence. Do not
feed the wood by hand, but with the push stick.
12.4
General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition
to the general rules for safe working, the following points must be observed:
Before commissioning, check the machine for completeness and function. Only use the
machine if the necessary guards and other protective devices are fitted. These guards
must be in good operating condition and properly maintained.
Choose a level, vibration-free, non-slip surface for the installation location.
Ensure sufficient space around the machine!
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
Ensure a clean working environment!
Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece
parts etc.).
Only use perfect tools that are free of cracks and other defects (e.g. deformations).
Remove setting tools from the machine before switching on.
Check the strength of the machine connections before each use.
Never leave the running machine unattended. If necessary, stop the machine before
leaving.
The machine may only be operated, serviced or repaired by persons who are familiar
with it and who have been informed of the dangers arising in the course of this work.
Ensure that unauthorised persons maintain an appropriate safety distance from the ma-
chine and, in particular, keep children away from the machine.
Wear suitable protective equipment (eye protection, respiratory protection, ear protec-
tion, gloves when handling tools,) as well as close-fitting work protective clothing -
never wear loose clothing, ties, jewellery, etc. - danger of being drawn in!
Hide long hair under hair protection.
Do not remove any sections or other parts of the workpiece from the cutting area while
the machine is running!
symbol pic
