background image

Maintenance and Storage

• Clean the device using a damp cloth and mild soap. Gently wipe clean. 

Note:

 This device 

is manufactured with water detection technology. Do not submerge the device in water or 

other liquids. Water damage to the electronics will void the warranty.

• The device should be operated, transported and stored at temperatures between 50° F 

and 104° F (10° C and 40° C), with relative humidity between 30% - 85%. All values have 

+/- 10% tolerance.

• Store the device, remote control and gel pads in the original packaging when not in use.

• If the device is not working properly, stop using immediately. Do not disassemble or modify 

the device.  Contact Hollywog Customer Service at: Phone: 423 305 7778  

Email: [email protected].

Technical Specifications

Channels: Single channel

Waveform: Asymmetric biphasic square pulse

Pulse Amplitude: 0 ~110 mA = 0 ~ 55 volts, adjustable (at 500 ohm load)

Pulse Frequency: (Hz) 5-120

Pulse Width: (μs) 120 - 240

Timer Control: (mins) 30

Power Supply: Device: Two (2) AAA batteries (Internally Powered)

  Remote Control: One (1) CR2032 Lithium battery (Internally Powered)

Size (D x W x H): 0.7” x 7.5” x 3.5” (18 mm x 191 mm x 90 mm)

Weight (including battery): 4.8 oz (136 g)

Safety Standards: IEC/EN/UL 60601-1, IEC/EN 60601-1-2, IEC 60601-2-10, CAN/CSA 

C22.2 No. 601.1, EN 300200 / EN 301498-3

Made in the USA

Warranty

COMPANY SHALL NOT BE LIABLE IN ANY EVENT FOR INCIDENTAL OR  

CONSEQUENTIAL DAMAGES.

Hollywog, LLC (“Company”) warrants the WiTouch (“Product”) is free of defects in materials 

and workmanship. This warranty shall remain in effect for 1 year (12 months) from the date 

of purchase. If these Products fail to function during the 1 year warranty period due to a 

defect in material or workmanship, at the Company’s Option, Company or the selling retailer 

will replace the respective Product without charge within a period of thirty (30) days from the 

date on which the Product is returned to the Company or the retailer.

This Warranty Does Not Cover: WiTouch gel pads. Any defects, damage, loss, malfunc-

tion or failure in the Product caused by product misuse, alteration, disassembly or any use 

that is inconsistent with the Product’s Instruction Manual.

Atmospheric Pressure 

Limitations

Atmospheric

Pressure Limitations

1060

hPa

500

hPa

Temperature 

Limitations

Temperature 

Limitations

104ºF

40ºC

50ºF

10ºC

Humidity 

Limitations

85%

30%

Humidity Limitations

85%

30%

0 1 2 0

European

Conformity

European

Conformity

European

Directive

2002/96/EC

European 

Directive 

2002/96/EC

Type BF 

Applied Part

EC

REP

MDSS GmbH

Schiffgraben 41 

30175 Hannover, Germany

Limitations of Use and Storage

 

This device complies with part 15 of 

the FCC Rules. Operation is subject to 

the following two conditions: (1) This 

device may not cause harmful 

interference, and (2) this device must 

accept any interference received, 

including interference that may cause 

undesired operation. 

RF: 2.4GHz transceiver

Device:

 

FCC ID: N8L-HWOGTENS11

 

IC: 10346A-HWOGTENS11

Remote Control:

 

FCC ID: N8L-HWOGTENS12

 

IC: 10346A-HWOGTENS12

Summary of Contents for WiTouch

















Reviews: