EQUIPMENT — 5
128
2008 IMPERIAL
SEAT CONTROLS
The Pilot and Co-pilot seats are adjustable to
provide maximum comfort. Seats must be locked
in the forward facing direction while traveling.
NOTE:
The seats operate from 12 Volt DC
house power. The ignition must be on to
operate the seat heater.
Memory Control
Memory 1 & 2:
1. Position the seat as desired using the
power base control.
2. Hold the red set button and press the
Memory 1
button.
Memory 1
is now
set.
3. Press the
Memory 1
button to move
the seat to the stored position.
4. Repeat this procedure for the
Memory
2
button.
Auto Forward Feature Programming:
To help prevent damage to the pilot seat or
slide room, the pilot seat is programmed to
move forward automatically prior to room
activation. Programming should remain in
memory when the main battery disconnect
is turned off. Use the following steps to
program the auto forward function should seat
programming be lost.
1. Move seat to the forward position with the
seat back in the full upright position.
2. Press and hold the red set button for 30
seconds. Auto forward is now set. The seat
will automatically adjust to the forward
position and move the seat back to the
upright position when the front driver’s
side slide out room is retracted.
NOTE:
The auto-forward feature is
programmed at the factory. The
memory functions will be saved if the
seat loses power.
060197wa
060197z
