Holiday 2011 Aluma Lite, Owner'S Manual

Page: 124 / 190

122
e
q
u
Ip
m
e
n
t
-
5
INFORMATION
To receive cable channels television
must be on the Cable setting (also
called CATV by some manufacturers).
This setting is found in set-up menu.
In addition, a channel search must be
initiated to scan available channels
in area. Refer to television OEM
manual on how to receive all available
channels in the area.
NOTE
To view Cable TV signals the
motorhome must be connected
to Cable TV. Cable TV inputs
are available at many of today’s
campgrounds.
To Watch Main Television from Satellite
Signal:
The satellite receiver is not provided
therefore the input (Input 1, 2, 3, etc.) for
satellite reception will be determined when
satellite receiver is installed.
Turn on TV. Use Input that was
determined upon satellite receiver
installation.
Turn ON satellite receiver, then use
satellite tracking system to acquire
satellite.
Use satellite remote control to select
desired channel.
Use volume control on TV to select
desired sound level.
To Watch Bedroom Television from
Satellite Signal:
The satellite receiver is not provided
therefore the input (Input 1, 2, 3, etc.) for
satellite reception will be determined when
satellite receiver is installed.




Turn on TV. Use Input that was
determined upon satellite receiver
installation.
Turn ON satellite receiver, then use
satellite tracking system to acquire
satellite.
Use satellite remote control to select
desired channel.
Use volume control on TV to select
desired sound level.
NOTE
Satellite Receiver is not provided.
To Watch Main Television from a DVD:
Turn DVD player on.
Open DVD tray.
Insert DVD into tray.
Close tray. DVD will load and play
automatically.
Turn TV on. Using Input button select
Input 1.
Turn on dash radio. Press mode button
to select “Aux Rear”. Use dash radio
volume for sound. On some units after
DVD has loaded, use volume on TV
for sound.
To Watch Bedroom Television from a
DVD:
Turn DVD player on.
Open DVD tray.
Insert DVD into tray.
Close tray. DVD will load and play
automatically.
Turn TV on. Using Input button select
Input 2.
Use volume control on TV to select
desired sound level.
















To Play CD Using Bedroom Television
(Sharp Television):
Turn DVD player on.
Open DVD tray.
Insert CD into tray.
Close tray. CD will load and play
automatically.
Turn TV on. Using Input button select
Input 2.
Use volume control on TV to select
desired sound level.
dAsH RAdIO
The dash radio is Sirius ® ready and includes
an AM/FM tuner, CD/DVD player, Weather
Band and auxiliary inputs.
Operation Requirements:
Turn ON the battery switch by the
entry door.
Turn the dash Radio Power switch ON.
Turn ON the radio.
To Play Radio:
Press the MODE button until AM1,
AM2, F1, F2, F3 or radio call letters
appear in the duisplay.
Press the TUNE/TRACK knob and
select from AM1, AM2, F1, F2 or F3
Rotate and hold the TUNE/TRACK
knob until “Manual” appears in the
display then release.
Rotate TUNE/TRACK knob until
desired station appears in the display.
Adjust VOLUME knob to desired
level.













