Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Vehicle Care
273
6. Disconnect the electrical
connector.
7. Install a new bulb in the lamp
assembly.
Important:
Take care not to touch
the glass portion of the bulb.
8. Connect the electrical
connector.
9. Refit the wheelhouse liner
ensuring it is correctly fitted
behind the front bumper fascia
and install the front air
deflector.
10. Check the fog lamp for correct
operation.
Turn Signal Lamps
Front Turn Signal Lamp
To replace a front indicator
lamp bulb:
1. Open the bonnet. See
2. Remove the green bulb
socket (1) from the headlamp
assembly by turning it
anticlockwise.
3. Pull the bulb (2) straight out of
the bulb socket.
4. Install a new bulb in the bulb
socket.
5. Install the bulb socket in the
headlamp assembly by turning
it clockwise.
6. Check the front indicator lamp
for correct operation.
Rear Turn Signal Lamp
To replace a rear indicator
lamp bulb:
1. Open the liftgate.
2. Carefully prise off the two
screw covers (1) and remove
the two screws (2).
3. Remove the tail lamp assembly
by pulling it straight back until
the two outer retaining pins
disengage from their retainers.
4. If required, disengage the red
lock tab and disconnect the tail
lamp connector from the body
wiring harness.
Summary of Contents for MY19 AC Acadia
Page 1: ...MY19 AC Acadia MY19 AC Acadia Owner s Manual holden com au...
Page 330: ......