Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Vehicle Care
275
8. Install the bulb socket in the tail
lamp assembly by turning it
clockwise.
9. If disconnected, connect the
tail lamp connector to the
lift
gate wiring harness.
10. Install the tail lamp assembly
and install the two nuts.
11. Insert the tabs on the upper
edge of the
lift
gate access
cover and engage the
retainers. Ensure the retainers
clip in place securely.
12. Check the reverse lamp for
correct operation.
Licence Plate Lamp
To replace a number plate bulb:
1. Push the left end of the lamp
assembly toward the right.
2. Carefully lever the left side of
the lamp assembly down and
remove it from the
lift
gate.
3. Remove the bulb socket (1)
from the lamp assembly (3) by
turning anticlockwise.
4. Pull the bulb (2) straight out of
the bulb socket.
5. Install a new bulb in the bulb
socket.
6. Install the bulb socket in the
lamp assembly by turning it
clockwise.
7. Engage the right side of the
lamp assembly into the
lift
gate
and then push the left side to
snap it into place.
Summary of Contents for MY19 AC Acadia
Page 1: ...MY19 AC Acadia MY19 AC Acadia Owner s Manual holden com au...
Page 330: ......
