Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
274
Vehicle Care
5. Remove the bulb socket (1)
from the tail lamp assembly by
turning it anticlockwise.
6. Pull the bulb (2) straight out of
the bulb socket.
7. Install a new bulb in the bulb
socket.
8. Install the bulb socket in the tail
lamp assembly by turning it
clockwise.
9. Install the tail lamp assembly
ensuring the outer retaining
pins are engaged securely.
Install the two screws and
screw covers.
10. Check the rear indicator lamp
for correct operation.
Reverse Lamps
To replace a reverse lamp bulb:
1. Open the liftgate.
2. Carefully prise the lower
portion of the
lift
gate access
cover (1) at two places and
remove the cover.
Important:
Cover the
lift
gate trim
with tape to avoid damage.
3. Remove the two tail lamp
attaching nuts (2).
Carefully push on the inner nut
stud to disengage the lamp
from the
lift
gate. Remove the
lamp while disengaging the
lugs at the outer edge.
4. If required, disconnect the tail
lamp connector from the
lift
gate wiring harness.
5. Remove the bulb socket (1)
from the tail lamp assembly by
turning it anticlockwise.
6. Pull the bulb (2) straight out of
the bulb socket.
7. Install a new bulb in the bulb
socket.
Summary of Contents for MY19 AC Acadia
Page 1: ...MY19 AC Acadia MY19 AC Acadia Owner s Manual holden com au...
Page 330: ......
