HOLDEN MY19 AC Acadia, Owner'S Manual, Page: 156 / 330

Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
154 Infotainment System
If a mobile phone number has been
saved with a name and a place, the
direct command should include
both, for example
“ Call <name>
at work. ”
Using Voice Recognition for
List Options
When a list is displayed, a voice
prompt will ask to confirm or select
an option from that list.
When a display contains a list, there
may be options that are available
but not displayed. The list on a
voice recognition screen functions
the same as a list on other displays.
Scrolling or flinging can be used to
help display other entries from
the list.
Manually scrolling or paging the list
on a display during a voice
recognition session suspends the
current voice recognition event and
plays the prompt
“ Please select
manually or touch the Back icon on
the infotainment display to try
again.
”
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The display returns to the display
where voice recognition was
initiated.
The Back Command
Say “ Back ” or touch the Back icon
on the infotainment display to go to
the previous display.
If in voice recognition, and “ Back ” is
spoken all the way back to the
starting display, and then
“ Back ” is
spoken one more time, the voice
recognition session will cancel.
Help
Say “ Help ” on any voice recognition
display and the help prompt for the
display is played.
Touching
g
while the help prompt is
playing will terminate the prompt
and a beep will be heard. Doing this
will stop the help prompt so that a
voice command can be used.
Voice Recognition for the
Radio
If browsing the audio sources when
voice is touched, the voice
recognition commands for AM, FM,
and DAB are available.
“ Switch to AM ” : Switch bands to
AM and tune to the last AM radio
station.
“ Switch to FM ” : Switch bands to
FM and tune to the last FM radio
station.
“ Switch to DAB ” : Switch bands to
DAB and tune to the last DAB radio
station.
“ Tune to <AM frequency> AM ” :
Tune to the radio station whose
frequency is identified in the
command (like
“ nine fifty ” ).
“ Tune to <FM frequency> FM ” :
Tune to the radio station whose
frequency is identified in the
command (like
“ one oh one
point one ” ).