HOLDEN MY19 AC Acadia, Owner'S Manual

Page: 194 / 330

Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
192 Driving and Operating
When the vehicle is shifted into
P (Park), the ignition system will
turn off.
Emergency Engine Stop
{
Warning
Turning off the vehicle while
moving may cause loss of power
assist in the brake and steering
systems and disable the airbags.
While driving, only shut the
vehicle off in an emergency.
Do not turn the engine off when the
vehicle is moving.
If the engine must be turned off in
an emergency:
1. Brake using a firm and steady
pressure. Do not pump the
brakes repeatedly as this may
deplete power assist, requiring
increased brake pedal force.
2. Shift the vehicle to N (Neutral).
This can be done while the
vehicle is moving. After shifting
to N (Neutral), firmly apply the
brakes and steer the vehicle to
a safe location.
3. Come to a complete stop. Shift
to P (Park) and turn the
ignition off.
4. Set the electric parking brake.
See Electric Parking Brake
0 200 .
If the vehicle cannot be pulled over
and must be turned off while driving,
press and hold the ENGINE START/
STOP button for longer than
two seconds, or press twice in
five seconds.
Accessory Mode (Amber
Indicator Light)
This mode allows you to use some
electrical accessories when the
engine is off.
With the ignition off, pressing the
ENGINE START/STOP button one
time without the brake pedal applied
will place the ignition system in
Accessory mode.
The ignition will switch from
Accessory mode to off after
five minutes to prevent battery
run-down.
Start / Run (Green Indicator
Light)
This mode is for starting the engine.
Place the shift lever to P (Park) or
N (Neutral).
Customer care the brake pedal and
press the ENGINE START/STOP
button once.
Release the button after the starting
procedure begins. Engine cranking
will continue until the engine starts.
See Starting the Engine 0 193 . The
ignition will then remain on.
Ignition On
With the vehicle off and the brake
pedal NOT applied, pressing and
holding the ENGINE START/STOP
button for more than five seconds
will place the vehicle in Ignition on
mode. The instruments and audio
systems will operate as they do in
Start / Run, but the vehicle will not