Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Vehicle Care
257
Vehicle Checks
Bonnet
Opening
1. Pull the bonnet release handle
with this symbol on it. It is
under the instrument panel on
the driver's side of the vehicle.
2. At the front of the vehicle, pull
up on the centre of the bonnet
slightly, and push the
secondary bonnet release to
your right.
3. After you have partially lifted
the bonnet, gas struts will
automatically take over to lift
and hold the bonnet in the fully
open position.
Closing
{
Warning
To avoid injury and/or damage to
the vehicle, check each time,
before the bonnet is closed, that
the contact area is unobstructed.
1. Before closing the bonnet,
ensure all filler caps are fitted
correctly and nothing is left
behind.
2. Pull the bonnet down to close.
Lower the bonnet until the
lifting pressure of the gas struts
is reduced, then allow the
bonnet to fall and latch into
place under its own weight.
3. Check to ensure the bonnet is
closed. If the bonnet has not
fully latched, raise it again and
push the bonnet down from a
greater height than the
previous attempt.
{
Warning
If while driving you notice that the
bonnet has not been properly
closed, pull the vehicle over to the
side of the road at the earliest
possible moment and close the
bonnet correctly.
Summary of Contents for MY19 AC Acadia
Page 1: ...MY19 AC Acadia MY19 AC Acadia Owner s Manual holden com au...
Page 330: ......
