16
Hinge pin
Bottom part of the hinge
U pper part of the hinge
Mounting of the door and window hinges:
(see
illustration on the right).The bottom parts of the hinges are
to be attached to the right outer door and rear window
frames using the screws 4.8 x 25 (0.2“ x 1“ long) - into the
appropriate holes. The upper parts of the hinges are to
be attached to the inner door frames (existing holes) and
the frame of the back wall window with screws 4.8 x 19
(0.2“ x 0.75“ long). Hang the doors and window and insert
the spacers between the two parts of the hinges and then
insert the Hinge Pin from the top
and secure with Snap-Rings at
the bottom. If necessary, loosen
and adjust the hinges to get the
right fit.
Mounting of the manual window
opener
Attach the PVC-adapter – with the thick
eye on the bottom – to the Hexagon
Bolts (M 6x20) already placed in the
bottom profile of the Rear Wall Window.
Then attach Manual Window Handle
(about 12“ long) to the adapter (if it did
not already come assembled). Attach
the metal bracket with the treaded pin
sticking up to the Rear Wall Crossbar
(under the window) to the Hexagon Bolt
placed there earlier. By trial and error
determine the optimal position you
desire for both ends of the Manual
Window Opener. Hold the window in a
fixed open position by placing any eye in the handle bar over the pin sticking up from the
Crossbar below the window, and holding it in place with the large White Knob.
P
lacing of the sash locks / toggle switches – black PVC –
Attach a sash lock on the inside of the back window into the right hand vertical support (seen
from the inside) to the pre-drilled holes
using the 3.5 x 16 (0.14“ x 0.6“) screws . Do the same with the other 2 Sask Locks on the front
door as shown on the next page.
Attaching the Automatic Window Opener:
First follow the assembly instructions that come with the
Automatic Window Opener. Then attach the Automatic
Window Opener to the 2 Hexagon Bolts, earlier placed in both
the bottom crossbar of the Roof Window and the Crossbar of
the frame – as you can see in the illustration – with the short
arm going to the roof window and with the long arm going to the
Crossbar underneath.
Sash lock
Mounting of the Accessories
Detail C
