Hohner Maschinenbau GmbH – ORION 4
- 13 -
10. Adjustment by hand of the ORION 4
For any adjustment or installation work at the wire stitching machine
ORION 4
,
the drive unit can be moved by hand. For this step use the pipe spanner 19 mm
2
Attention!
Before all repairs, disconnect the power supply and set safety switch (main switch)
to „0“.
First remove the plug
1
. Put the double offset ring wrench
2
on the hexagon
3
of
the motor shaft and turn the pipe spanner
2
in direction of arrow
4
.
Important!
Before resumption of work the pipe spanner
2
has to be removed from the hexagon
of the motor shaft.
