ODP 40
4,000 Lb Drum Puller
- - 9 - -
© COPYRIGHT 2016 HOGG & DAVIS, INC
LOADING INSTRUCTIONS
1. Position trailer so that forklift or crane can be easily
positioned.
2. Position reel drive pin assembly so that the lifting eye and
removable pin are in the top position and apply brake.
3. Remove retaining pin from both the reel drive pin
assembly and the dumb end of the mandrel shaft pocket.
4. Remove entire shaft and drive pin assembly by lifting up.
5. Remove Nylatron bearing from dumb end of mandrel
shaft.
6. Remove locking collar / lifting assembly and centering
cone.
7. Insert mandrel shaft in the reel all the way to the drive pin
assembly, being careful to insert the pins completely.
8. Install centering cone (if needed) and locking collar /
lifting assembly. Be sure to set reel tight against drive pin
assembly.
9. Replace Nylatron bearing onto dumb end of mandrel
shaft.
10.
Lift reel with forklift or crane making sure that the
drive pin assembly has the lifting eye on top for proper fit.
Summary of Contents for ODP 40
