2
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
3. SYMBOLE ELEKTRYCZNE:
Prąd stały DC
Bezpiecznik
Prąd przemienny AC
Dioda
Prąd stały lub przemienny
DC/AC
Test ciągłości
Ważne informacje.
Zapoznaj się z instrukcją
AUTO
Zakres automatyczny
Niebezpieczeństwo
wysokiego napięcia.
Zgodność z dyrektywą Unii
Europejskiej
Uziemienie
Podwójna izolacja
Niski poziom baterii
4. OPIS URZĄDZENIA
1) miernik cęgowy
2) Ekran LCD
3) Przyciski silikonowe
4) Przełącznik obrotowy funkcji
5) Gniazdo 10 A.
6) Gniazdo μA / mA
7) Gniazdo Com
8) Gniazdo INPUT
9) Obudowa
4-1. Opis przycisków
• PRZYCISK „SELECT”
Naciśnij ten przycisk, aby wybrać Ω”
“ ” “ ”lub °C/°F gdy przełącznik funkcji ustawiony jest na pozycji „Ω”.
• PRZYCISK
H
/
Po naciśnięciu tego przycisku wyświetlacz LCD pokaże ostatni odczyt i symbol „H” pojawi się do ponownego naciśnięcia.
Funkcja podświetlenia - naciśnij ten przycisk przez 2 sekundy podświetlenie zaświeci się, po 15 sekundach podświetlenie wyłączy
się automatycznie.
• PRZYCISK
MAX/MIN
Naciśnij ten przycisk, miernik przejdzie w tryb MAX, a na wyświetlaczu LCD pojawi się „MAX” jako wskaźnik. Aktualny odczyt na
ekranie jest maksymalny ze wszystkich odczytów, ponieważ tryb został aktywowany. Naciśnij ponownie, miernik przejdzie w tryb
MIN, a na wyświetlaczu LCD pojawi się „MIN” jako wskaźnik, aktualny odczyt na LCD to minimalny odczyt wszystkich pomiarów.
Naciśnij i przytrzymaj ten przycisk przez około 2 sekundy, aby wyjść z trybów MAX i MIN.
• PRZYCISK
RANGE
Zakresy napięcia dla prądu przemiennego i stałego AC/DC, i rezystancji mogą być wybierane ręcznie lub automatycznie przez
naciśnięcie przycisku sterowania zakresem. Naciśnij ten przycisk, aby wybrać potrzebny zakres i tryb kontroli.