10
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
3. ELECTRICAL SYMBOLS:
Direct Current DC
Fuse
Alternating Current AC
Diode
Direct or alternating
current DC/AC
Continuity test
Important safety
information.
AUTO
Automatic range selection
High voltage can occur. .
Compliant with
the European Union
Directive
Ground
Double insulation
Low battery
4. DEVICE DESCRIPTION
1) Clamp meter
2) LCD screen
3) Silicone buttons
4) Function rotary switch
5) 10 A socket.
6) μA / mA socket
7) Com socket
8) INPUT socket
9) Housing
4-1. Buttons description
• Select button
Press this button to select „Ω”, ”
“ ” “ ”or °C/°F when the function switch is set to „Ω”.
• BUTTON
H
/
When this button is pressed, the LCD display will show the last reading and the „H” symbol displays until pressed again. Backlight
function - press this button for 2 seconds the backlight will light up, after 15 seconds the backlight will turn off automatically.
• BUTTON
MAX/MIN
Press this button, the meter will go into MAX mode and the LCD will display „MAX” as an indicator. The current reading on the
screen is the maximum of all readings because the mode has been activated. Press again, the meter will go into MIN mode and
„MIN” will display as an indicator on the LCD, the current reading on the LCD is the minimum reading of all measurements. Press
and hold this button for about 2 seconds to exit the MAX and MIN modes.
•
RANGE
BUTTON
The voltage ranges for AC/DC, DC and resistance can be selected manually or automatically by pressing the range control button.
Press this button to select the needed range and control mode.
