10
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
1. GENERAL INFORMATION
The device is intended for use both in private households and for commercial purposes. The digital multimeter is an intelligent, au-
tomatic integrated handheld device (10000 counts) with TRUE RMS function. It has a fuse alarm, an incorrect plug insertion alarm,
overload protection, battery voltage drop indicator and other functions. It is the ideal professional multitool. It was designed and ma-
nufactured in accordance with the safety requirements for an electronic measuring instrument and a hand-held digital multimeter in
accordance with the international safety standard for electricians EN 61010. It’s compatible with 600V CAT. Ⅲ EN 61010 and contamina-
tion level. Before using this device, read the user’s manual carefully and pay attention to the associated safety standards.
Any other use is not intended and may lead to property damage or even personal injury. Use the device only in accordance with this
manual. The manufacturer does not assume any liability for damage caused by improper use. The device is not a measuring device
within the meaning of the „Measurement Law”.
GENERAL SAFETY CONDITIONS
It is within the scope of the owner and user’s responsibility to read, understand and follow these rules:
IMPORTANT:
Please read this manual carefully. Please pay special attention to the requirements of safe use, warnings and
notices. Use the product correctly and carefully for the purposes for which it is intended. Failure to do so may result in da-
mage and/or harm to health and will void the warranty. Please keep this manual in a safe place for further use. When pas-
sing the device on to another person, also give them the manual.
• Please use the device only for the purpose intended for the device.
• Please keep the device away from heat, direct sunlight, moisture (under no circumstances immerse in liquid substances) and sharp
edges. Do not operate the device with wet hands.
• Do not leave the device running unattended. Always switch off the unit before leaving the room.
• Check the device regularly. In case of damage, stop using the device.
• For the safety of children, please do not leave any freely accessible parts of the packaging (plastic bags, cartons, polystyrene, etc.).
WARNING
Don’t let the kids play with the foil. Danger of suffocation!
This device is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and/or skills,
unless such persons are accompanied and supervised by persons responsible for their safety or have received precise instructions
for the device usage and understand the risks involved. Children may only use this device if they are over 8 years old and under the
supervision of a person responsible for their safety or if they have received instructions for use of this device and understand the risks
involved. Children cannot play with this device.
1.1 SAFETY SYMBOLS:
High voltage
Ground
Alternating current
Double insulation
Direct current
Fuse
Defective fuse
Compliant with EU instructions
Warnings and important safety signs can be found in the manual before use. Improper use may damage
the equipment or its parts.
1.2 PROTECTION MEASURES
* When measuring the voltage, the maximum input voltage is 600 V AC / DC.
* When measuring frequency, resistance, switching on and off the diode, a voltage of AC/DC below 600 V can be resisted.
* µ When measuring the current A and mA, secure with a protective tube (F600mA / 250V).
On the gearboxes uA and mA, if the fuse is broken, after inserting the plug into the Ua /mA, the SAFETY and the symbol
indicating a fuse failure, in this case the fuse must be replaced with the appropriate specification in order to continue measuring.
The same indication will also be displayed for the current 10A run.
