23
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
4.2.3. Automatische Widerstandsmessung
Bereich
Auflösung
Messunsicherheit
1000 Ω
0.1 Ω
±(0.8% M 3 Zeichen)
10 kΩ
1 Ω
100 kΩ
10 Ω
1000 kΩ
100 Ω
10 MΩ
1 kΩ
100 MΩ
10 kΩ
±(1. 5% M10 Zeichen)
SMART – Widerstand
Bereich
Auflösung
Messunsicherheit
6 kΩ
0.1 Ω
±(1.2% M 5 Zeichen)
Überspannungschutz: 250 V.
Leerlaufspannung: 1,5 V.
4.2.4 Diodentest
Funktion
Bereich
Auflösung
Bedingungen
Diode test
0.15V-2.5V
0.001V
Gleichstrom: ca. 1 mA; Leerlaufspannung:
ca. 2,5 V.
Das Display zeigt den ungefähren Wert
des Diodenspannungsabfalls an.
Überspannungschutz: 250 V.
4.2. 5 Summer ein / aus
Funktion
Bereich
Auflösung
Einweisung
Bedingungen
100 Ω
1 Ω
Der Widerstand beträgt nicht
mehr als 30 Ω und das Gerät gibt
ein akustisches Signal von sich
Leerlaufspannung:
ca. 1 V.
Überspannungschutz: 250 V.
4.2.6 Kapazität
Bereich
Auflösung
Messunsicherheit
100 nF
0.01 nF
±(3.5% M 15 Zeichen)
1000 nF
0.1 nF
10 µF
1 nF
100 µF
10 nF
1000 µF
100 nF
10 mF
1 uF
Überspannungschutz: 250 V
4.2.7 Gleichstrom
Bereich
Auflösung
Messunsicherheit
600mA
0.1mA
±(1% M 3 Zeichen)
10.00A
10mA
±(1.5% M 3 Zeichen)
Überspannungschutz: Sicherung im mA-Bereich (FF630mA / 250V); 10A Sicherung (FF10A / 250V).
Wenn der gemessene Strom größer als 5 A ist, darf die kontinuierliche Messzeit 15 Sekunden nicht überschreiten. Es ist erfor-
derlich, die Strommessung nach der Messung für 1 Minute zu stoppen.