24
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
4.2.8 Wechselstrom
Bereich
Auflösung
Messunsicherheit
600 mA
0.1 mA
±(1% M 3 Zeichen)
10 A
10 mA
±(1.5% M 3 Zeichen)
Überspannungschutz: Sicherung im mA-Bereich (FF630mA / 250V); 10A Sicherung (FF10A / 250V).Wenn der gemessene Strom
größer als 5 A ist, darf die kontinuierliche Messzeit 15 Sekunden nicht überschreiten. Es ist erforderlich, die Strommessung nach
der Messung für 1 Minute zu stoppen. Frequenzgang: 50 Hz - 400 Hz, RMS
4.2.9 Batterien
Bereich
Auflösung
1.5 V
0.001 V
9 V
0.001 V
Überspannungschutz: 250 V
5. Ersetzen der Batterie
Ersetzen Sie die Batterie sofort, wenn das Symbol „
”. auf dem Display angezeigt wird, um einen Stromschlag oder
Verletzungen durch falsche Messwerte zu vermeiden. Vor dem Öffnen der Batterieabdeckung und dem Ersetzen der
Batterie muss das Gerät ausgeschaltet und überprüft werden, ob die Messleitungen vom Messkreis getrennt wurden.
Ersetzen Sie die Batterie gemäß den folgenden Schritten:
1. Trennen Sie das Gerät von der Stromversorgung.
2. Ziehen Sie alle Messleitungen aus der Messbuchse.
3. Entfernen Sie die Schrauben, mit denen die Batterieabdeckung befestigt ist.
4. Entfernen Sie die Batterieabdeckung.
5. Entfernen Sie die alten Batterien.
6. Ersetzen Sie die Batterien durch eine neue 1,5 V Batterien.
7. Bringen Sie die Batterieabdeckung wieder an und ziehen Sie die Schrauben fest.