Hog Technologies STRIPE SH7500, Operation Manual

Page: 127 / 187

127
Section 5 - Scheduled Maintenance
Carbide Ring Packing
Stuffing Box, Glandnut, Packing & Plunger
Plunger
Guide Bushing or Carbide Ring
9. Check the plunger for scoring and wear. Polish
or replace if necessary.
10. Reinstall the guide bushing in the gland nut
and apply anti-seize to the gland nut threads.
11. Insert the plunger fully into the gland nut. Be
careful to not dislodge the guide bushing.
12. Install new packing onto the plunger. Push it
tight against the guide bushing.
13. Carefully install the plunger, packing and gland
nut assembly into the stuffing box
14. Hand tighten the gland nut. Then insert the
Jetstream Tool into the gland nut and hit the
tool three times with the hammer in a clock-
wise direction to tighten.