Page 3-40
Chapter III Operation
3. Following the on-screen graphics, rotate the pod
or target back approximately as directed by the
indicator.
4. When complete, an instruction screen appears
reminding you to lower the vehicle. This is only
necessary when all wheels that need to be posi-
tioned individually have been done. It is acceptable
to leave the vehicle elevated if additional wheels
require compensating. Lower the vehicle and
jounce the suspension prior to returning to any
readings screen.
5. As each wheel compensation is completed the
software returns to the selection screen and a
check mark appears next to the wheels that have
been successfully positioned. Click on the Cancel
button once all wheels are compensated to return
to the alignment readings screens.
6. Lower the vehicle when instructed and click OK.
Summary of Contents for Pro42
Page 1: ...Operators Manual Portable Imaging Alignment Systems with Pro42 ...
Page 2: ...Blank page ...
Page 8: ...Page 8 Table of Contents ...
Page 65: ...NOTES ...
