Page 3-39
Chapter III Operation
Steering Level Check
Selecting this feature allows the user to check the level
of the steering wheel.
When selected you will be asked to turn the steering wheel
right 10 degrees then return to center.
The screen asks if the steering wheel is level. If so, select
the green check mark, if not select the red “X”.
If the wheel is not level, adjust the toe to correct to a
level condition.
Single Wheel Rollback
The vehicle can be jacked to allow each wheel to be
compensated independently. This is useful if a wheel
must be removed during the alignment, for example to
install a shim in the rear. The
Single Wheel Position-
ing
procedure locates each wheels axis of rotation by
jacking the vehicle and moving each pod and target.
1. Select
Single Wheel Positioning
from the Measure
screen. The screen shows the vehicle’s 4 wheels
with a box around each wheel. If a check appears
in the box, it indicates that the wheel has been
previously successfully positioned. Use the mouse
to place the box around the wheel to be positioned
and click.
2. Raise the front or rear axle being positioned as
instructed. Notice that VODI, shows which wheel
has been selected.
Summary of Contents for Pro42
Page 1: ...Operators Manual Portable Imaging Alignment Systems with Pro42 ...
Page 2: ...Blank page ...
Page 8: ...Page 8 Table of Contents ...
Page 65: ...NOTES ...
