Hofmann FPA12144, Instruction Manual

Page: 7 / 44

7 of 44
ATTENTION! This lift is intended for indoor installation only. It is
prohibited to install this product outdoors. Operating environment
temperature range should be 41 – 104 °F (5 – 40 °C). Failure to
adhere will result in decertification, loss of warranty, and possible
damage to the equipment.
5.0 CONTENTS
The lift is packaged to protect from any damage that may occur in shipping. The two
deck assemblies and crossmembers are packaged together with the accessory boxes
strapped to them.
Main Structural Components:
1 ‐ Left Side Deck Assembly (complete with hydraulic cylinder)
1 ‐ Right Side Deck Assembly
1 ‐ Front Crossmember Assembly (with air cylinder release locks and sheaves)
1 ‐ Rear Crossmember Assembly (with air cylinder release locks and sheaves)
Accessory Box Components:
Box 1: Contents:
1 ‐ Power Post (with safety ladder)
3 ‐ Post (with safety ladder)
Box 2: Contents:
1 ‐ Power Pa1ck Assembly complete with Flow Control
2 ‐ Approach Ramps
7 ‐ Sheave Assemblies
1 ‐ Set of Cables (set contains 4 cables with nuts and spacers)
7 ‐ Sheave Spacers (different sizes)
2 ‐ Front Wheel Stops
2 ‐ Ramp Pins
4 ‐ Deck Sheave Pins
1 ‐ Air Kit (with 1/4” and 3/8” polytube and fittings)
1 ‐ Hydraulic Hose (with fittings)
1 ‐ Hose Guard
4 ‐ Sheave Covers
3 ‐ Cable Tie (for attachment of hydraulic hose to cylinder)
2 ‐ Recoiled Air Hoses 12’ long
1 ‐ Coupler 1/4” NPT
1 ‐ Package of Hardware (with its own packaging list)
1 ‐ Owner’s manual
1 ‐ ALI manual “Lifting It Right”
1 ‐ Automotive Lift Safety Tips
1 ‐ Automotive Lift, Operation, Inspection and Maintenance manual