HOFFEN BBQY-H091, Instruction Manual

Page: 39 / 48

[39]
EN
ELEC
TRIC BARBECUE 2 IN 1
Assemble the zinc plate (D) on the upper
tray (A) by fitting it to the screw on the tray
(A) and secure both parts with the nut (M)
provided.
Also fit the metal bar (C) in the side holes of
the zinc plate (D) and the upper tray (A) as
shown in the figure on the side.
Turn the set of trays (A) and plate (D)
upside down and assemble the rubber
sockets (N) at both ends of the metal bar
(C) as shown in the figure on the side.
In the figure on the left side you can see in
detail the fitting of the rubber sockets (N) at
the end of the metal bar (C).
After the sockets (N) are assembled, turn
the entire assembly to the correct position
again.
Insert or set of control panel, heating
element (resistance) and power cord
(B) on the tray (A) and plate (D) already
assembled.
After assembling the control panel, heat-
ing element (resistance) and power cord
(B), the appliance must be as shown in the
figure on the side.