HOFFEN BBQY-H091, Instruction Manual

Page: 37 / 48

[37]
EN
ELEC
TRIC BARBECUE 2 IN 1
Assembly - Barbecue Stand
Start by assembling the feet of the stand by
fitting the upper tubes of the feet (H) to the
lower tubes (K) as shown in the figure beside.
Choose one of the feet and proceed with the
assembly of the grid support (J). Please note
2 important details:
- There are 2 types of support bars (J): the
smallest are for the sides and the largest are
for the front and rear of the support.
- The shortest part of the support bars (J)
must face upwards as shown in the figure on
the side.
Then you must fit the screw (O) through the
hole in the different parts, joining the 2 bars of
the support to the foot and screwing the wing
nut as shown in the figure on the side.
Repeat the procedure for all feet until the
stand is properly assembled as shown in the
figure on the side.