Hobby FIAT Premium Drive Manual Download

Page: 91 / 203

Electrical Installations

07-13

Air conditioning

The following functions for the air-conditioning
system can be set on the control unit:

- On/Off
- Cool Mode: cooling and ventilation

Cool Low / Cool / Cool High

-  Fan Mode: ventilation only
  Fan Low / Fan High
-  Dry: heating function

The aforementioned functions are only available for air

conditioning systems that are CI bus compatible.

Alde hot water heating system (radiator icon)

The optional Alde hot-water heating system can be controlled
using its own control unit or the LCD control unit.

Settings:

•  Temperature: in steps of 0.5° from
  +5°C to +30°C
•  Shower icon: short-term increase in the amount of hot

water

• Electric heating (lightning flash): performance can be set to

Off, 1kW, 2kW or 3kW

• Flame icon: heating with gas On / Off

Summary of Contents for FIAT Premium Drive












































































































































































































Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands

Hobby FIAT Premium Drive, Manual

Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands