Hobby FIAT Premium Drive Manual Download

Page: 117 / 203

Water

08-1

Chapter 8: Water

8.1 General

• Always use water that is of drinkable quality when wor

king with food. This also applies for washing your hands

or objects that come into contact with food.

• In order to ensure excellent water quality, water should

be taken directly from the public drinking water system.

• Garden hoses, watering cans and similar materials unsu

itable for drinking water should never be used to fill the

mobile system.

• If the motor home has not been used for a longer period

of time, the entire water system must be emptied com

pletely.

• After longer periods of stagnation, the water system

must be flushed thoroughly before being used. Should

you discover impurities, the material should be disin

fected using suitable agents that have been approved for

such measures.

8.2 Water supply

We recommend that you inspect any water you have left in

the tank, this is very critical before using the water again.

Function of the water supply

Fresh water is supplied to the hot-air heating system, the
kitchen and toilette via a submersible pump. The TANDEM
submersible pump operates electrically:
- via the starter / ancillary battery,
- when the mobile home is connected to the 230V mains

via the power supply.

Summary of Contents for FIAT Premium Drive












































































































































































































Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands

Hobby FIAT Premium Drive, Manual

Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands