Hobby FIAT Premium Drive Manual Download Page 101

Page: 101 / 203

Electrical Installations

07-23

7.3 Electric power supply

In all of the vehicles the central electrical system is installed

under the refrigerator.

(with the exception of the 65 HFL

Drive) and under the passenger's seat (only Fiat Drive)

Electricity for the motor home can be obtained from the fol-
lowing connections:

- 230V mains connection 50 Hz

- via the ancillary battery

Everything that uses 12 V, such as lighting, water supply, etc.,

is available.

Supply via mains connection

The mobile home is connected to the external 230V mains

by a CEE feeder plug

located in the side wall.

To connect the CEE feeder plug

• Switch off the automatic circuit breaker

(p. 07-24) by

pressing the rocker switch

down (p. 07-24).

• Flip up the cover flap of the external socket

(see 05-11).

• Completely unwind the connector cable.
• Open the cap of the CEE connector plug

by pulling it up in a

90° angle.

• Insert the plug

until it locks into place.

• Switch the automatic circuit breaker

(p. 07-24) back on.

Summary of Contents for FIAT Premium Drive












































































































































































































Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands

Hobby FIAT Premium Drive, Manual

Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands