Hobby FIAT Premium Drive Manual Download

Page: 153 / 203

Built-in devices

10-15

Please refer to the separate operating instructions for the

„Alde Compact 3020“ for more detailed information on the

operation, use and upkeep of the hot-water heater.

If the vehicle is equipped with an LCD control panel, the

basic functions of the hot water heating system can be con-

trolled using the panel next to the entrance

(see p. 07-12)

Functionality

-   hot-water heater
-   heating system and hot-water heater
-   heating system

Operating unit

While on standby, you can see which functions have been
activated for the heating system; the backlight is switched

off. After two minutes, the operating unit switches from the

setting position to standby if no key is pressed or if the arrow
keys have been used to set it to standby.

To start the hot water heater

To start the heating system, press the On/Off button and

the start image will appear. The heater will start with the
settings that were last used.

Summary of Contents for FIAT Premium Drive












































































































































































































Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands

Hobby FIAT Premium Drive, Manual

Search results

Summary of Contents for FIAT Premium Drive

Reviews:

Related manuals for FIAT Premium Drive

Brands by name

Popular brands