Hobby FIAT Premium Drive Manual Download Page 127 | Manualshive

Page: 127 / 203

background image

Water

08-11

Emptying the waste tank

The waste tank must be emptied at the latest when the LED
lights up. It is recommended that the tank is emptied before
this. The LED lights up when the tank contains more than 15
litres. From this point in time the tank has a residual capacity
of 2 litres, representing approx. 5 flushes.

• Open the toilet flap and pull the holding bar up to remove

the waste tank.

The waste tank can only be removed when the drain

valve is closed.

Only empty the waste tank at specially designated dis

-

posal points and never in open spaces!

•  Take the waste  tank to a designated disposal site,
  making sure to hold the drain nozzle in an upright position.
•  Remove the cap on the drain nozzle.
•  Tilt the waste  tank so that the drain nozzle is pointing

downwards.

• Press the vent button with your thumb and hold it down.

The waste tank will drain itself.

• Return the waste tank to its storage position, ensuring

that it is pushed in until the holding bar locks into place.

• Lock the service flap.

«
...
125
126
127
128
129
...
»

Summary of Contents for FIAT Premium Drive












































































































































































































Reviews:

No comments

Related manuals for FIAT Premium Drive

Unicorn Barcelona

Brand: Bailey Pages: 26

GearWagon 125 Camper

Brand: LetsGoAero Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands