Hobby FIAT Premium Drive, Manual

Page: 81 / 203

Electrical Installations
07-3
Functions of the main switch
• After initially connecting the motor home to the 230 V mains,
you must press either the main switch ( or Renault: any con-
trol key) in order to activate all of the 12 V electrical devices
and the 230 V electrical devices that are switched by the
system (Combi 6 E
*
, air-conditioning
*
).
• Once the system is in operation, press the main switch briefly
to turn all of the lights off. All of the 12 V steady electrical
devices (e.g. water supply, refrigerator control, heat blower)
remain activated. The devices that were previously switched
on are stored in the system; pressing on the main switch reac -
tivates them. This also resets the degree to which those lights
were dimmed that can be regulated.
• Renault: Pressing the main switch for at least four seconds
while the system is switched on will turn off not only the pre -
sently activated devices, but also the entire 12 V system.
• If there should be a power failure, the system will remember
whether the main switch was on or off. As soon as the power
is back on, the main switch will automatically switch itself back
on. Electrical devices that continuously use current, such as
the heating, will then begin to operate again.
Illuminated Wall
Cabinets and Ceiling Lamp
• Briefly press the key to switch each lamp on and off. Press
longer on the key to regulate how brightly you want the
If the vehicle's motor is running, the refrigerator will operate
automatically on 12V, i.e. it is not necessary to press the main
switch. In this case, the selector switch for the refrigerator must
be set to 12V operation. All other 12V electrical devices will
only operate on the ancillary battery if the main switch has
been activated.
Controlpanel
Fiat (Drive) Renault