Page 13
pREpARING TO DRIvE YOUR OUTLAW RTR BUGGY
Continued On Next Page
q
Rotate the steering wheel forward (to the right). The
Outlaw RTR Brushless Buggy's
front wheels should turn right.
IMPORTANT:
If the wheels don't turn right, move the transmitter's steering channel
servo reversing switch to change the direction that the front wheels turn. For more
information, see page 6.
q
Rotate the steering wheel backward (to the left). The
Outlaw RTR Brushless Buggy's
front wheels should turn left.
q
Let go of the steering wheel. The
Outlaw RTR Brushless Buggy's
wheels should
return to center.
IMPORTANT
If the wheels do not point straight ahead (center) after you return the
steering wheel to center, use the transmitter's steering trim knob to adjust the wheels
so that they point straight ahead. For more information, see page 15.
n
Checking the Steering and Throttle Controls, Continued....
IMPORTANT:
If the wheels don't spin forward, move the transmitter's throttle
channel servo reversing switch to change the direction that the wheels spin. For more
information, see page 6.
q
Pull the throttle trigger back. Both the front and rear wheels should spin forward.
q
Release the throttle trigger and the wheels should stop spinning.
q
Push the throttle trigger forward. Both the front and rear wheels should spin backward.
q
Release the throttle trigger and the wheels should stop spinning.
IMPORTANT:
If the wheels continue to spin after releasing the throttle trigger,
use the transmitter's throttle trim knob to adjust the throttle so that the wheels
don't spin when the throttle trigger is released. For more information, see page 15.
As a safety precaution to prevent damage to the drivetrain, the
Outlaw RTR Brushless Buggy
must be stopped before going
into reverse. When the
Outlaw RTR Brushless Buggy
is moving forward and you push the throttle trigger to go into reverse, the
Outlaw RTR Brushless Buggy
will begin to brake and come to a stop. To go into reverse, release the throttle trigger momentarily, then
push the throttle trigger forward again.
n
Throttle Control Range Calibration
Before driving your
Outlaw RTR Brushless Buggy
for the first time, we recommend that you calibrate the throttle to ensure that you're
achieving maximum throttle range. To calibrate the throttle control range, follow these procedures:
q
Double-check that the ESC is turned 'OFF', then connect your charged battery pack
to the ESC battery connector.
q
Turn the transmitter 'ON', then adjust both throttle EPA knobs so that they are centered
(point straight ahead).
Summary of Contents for Outlaw 4WD
Page 1: ...Page 1 Kit Product 143400...
Page 37: ...Page 37 NOTES Continued On Next Page...
Page 38: ...Page 38 NOTES...
