Hobbico UPSTAR Manual Download Page 6 | Manualshive

Page: 6 / 20

background image

Replacement parts for the Hobbico Upstar are available using the order numbers in the

Replacement Parts List

that

follows. The fastest, most economical service can be provided by your hobby dealer or mail-order company.

To locate a hobby dealer, visit the Hobbico web site at

www.hobbico.com

. Choose “Where to Buy” at the bottom

of the menu on the left side of the page. Follow the instructions provided on the page to locate a U.S., Canadian
or International dealer. If a hobby shop is not available, replacement parts may also be ordered from Tower
Hobbies

®

at

www.towerhobbies.com

, or by calling toll free (800) 637-6050.

Parts may also be ordered directly from Hobby Services by calling (217) 398-0007, or via facsimile at (217) 398-
7721, but full retail prices and shipping and handling charges will apply. Illinois and Nevada residents will also be
charged sales tax. If ordering via fax, include a Visa

®

or MasterCard

®

number and expiration date for payment.

Mail parts orders and payments by personal check to:

Hobby Services

3002 N Apollo Drive, Suite 1

Champaign IL 61822

Be certain to specify the order number exactly as listed in the

Replacement Parts List

. Payment by credit card or

personal check only; no C.O.D.

If additional assistance is required for any reason contact Product Support by e-mail at

[email protected]

, or

by telephone at (217) 398-8970.

6

REPLACEMENT PARTS LIST

ORDER NUMBER

DESCRIPTION

HOW TO PURCHASE

HCAA3760...........................WING SET UPSTAR EP GLIDER ......................Hobby Supplier
HCAA3761 .......................FUSELAGE SET UPSTAR EP GLIDER ...................Hobby Supplier
HCAA3762 ............................TAIL SET UPSTAR EP GLIDER ........................Hobby Supplier
HCAA3763............................CANOPY UPSTAR EP GLIDER .......................Hobby Supplier
HCAA3764 ......................FOLDING PROP UPSTAR EP GLIDER..................Hobby Supplier
HCAA3765.............................MOTOR UPSTAR EP GLIDER ........................Hobby Supplier
HCAA3766 ................................ESC UPSTAR EP GLIDER............................Hobby Supplier
HCAA3767 .......................BATTERY PACK UPSTAR EP GLIDER...................Hobby Supplier

Missing pieces........................Contact Product Support

Instruction manual ....................Contact Product Support

Full-size plans.................................Not available

ORDERING REPLACEMENT PARTS

«
...
4
5
6
7
8
...
»

Summary of Contents for UPSTAR





















Reviews:

No comments

Related manuals for UPSTAR

Brand: Laser Pegs Pages: 3

F4U-1D Corsair 60cc

Brand: Hangar 9 Pages: 64

MARINER 40 MK II ARF

Brand: Lanier R/C Pages: 14

Brand: Hobbico Pages: 28

Brand: LEGO Pages: 36

Super Heroes 6862

Brand: LEGO Pages: 64

Brand: Zhejiang Jiajia Ride-On Co. Pages: 27

Megaphone Mission Voice Changer

Brand: VTech Pages: 12

Brand: Tabletop Scenics Pages: 12

Brand: Ravensburger Pages: 28

Brand: Eduard Pages: 2

EP F-20 Tigershark ElectriFLy

Brand: GREAT PLANES Pages: 16

Brand: pitsco Pages: 162

KING TIGER 3888-1

Brand: Torro Pages: 18

Brand: JR Pages: 76

Brand: Dromida Pages: 8

Brand: Black Horse Model Pages: 39

Crane Car American Flyer

Brand: Lionel Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands