❏
1. Connect the included
electronic speed controller
to the motor leads and to the receiver. Using a piece of
self-adhesive hook and loop material, secure the ESC to
the fuselage. You can also affix the ESC switch in a
convenient location. Hook the servos up to the
appropriate channels on the receiver.
❏
2. Trim the canopy along the molded-in cut lines. Test
fit the canopy on the fuselage and sand as necessary
until it fits well.
❏
3. When satisfied with the fit, position it onto the
fuselage and drill two 1/16" [1.6mm] holes at the front
and back and secure it to the fuselage using (2) #2 x 1/4"
[6mm] screws.
❏
4. Slide the two wooden dowels into the dowel holes
in the fuselage. The longer dowel installs in front. Center
the wing onto the fuse and secure it with the included
rubber bands.
INSTALL THE CANOPY
13
