OM-284833 Page 38
SECTION 10
−
PARTS LIST
10-1. Drive Roll And Wire Guide Kits
.
Base selection of drive rolls upon the following recommended usages:
1
V-Grooved rolls for hard wire (solid steel and metal cored).
2
U-Grooved rolls for soft and soft shelled cored wires (aluminum).
3
U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).
4
V-Knurled rolls for hard shelled cored wires (flux cored).
5
Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination
with U-Grooved).
Ref. S-0026-B/7-91
Wire Diameter
Fraction
Decimal
Metric
.030/.035 in.
.030 in.
.035 in.
.045 in.
.030/.035 in.
.030 in.
.035 in.
.045 in.
0.8/0.9 mm
0.8 mm
0.9 mm
1.2 mm
Kit No.
204 579
079 594
079 595
079 596
Drive Roll
Part No.
Type
203 526
053 695
053 700
053 697
V-Grooved
V-Grooved
V-Grooved
V-Grooved
Inlet
056 192
056 192
056 192
056 193
Wire Guide
.023/.025 in.
.023/.025 in
0.6 mm
087 131
087 130
V-Grooved
056 192
A complete Parts List is available on-line at
www.HobartWelders.com
