Hobart 60CU24, Operation And Maintenance Manual With Illustrated Parts List, Page: 68 / 234

OM-2098C / Operation and Maintenance Manual
60CU24 / Series 500060C / 400 Hz. Generator Set
April 01, 2005 Chapter 2-2
Page 4
Symbol Name Specification Notes
1 Grease, General Purpose MIL-G-3545 Excludes those of sodium or soda
soap thickness.
2 Oil, Engine, Heavy Duty API Class CC Must contain as but not more than
1.85%
3 Dry Graphite Lubricant (for
trailer brake cables)
MIL-T-5544, or
equivalent
Use on brake cables. DO NOT use
general purpose grease.
Lubricants Chart
Figure 2
CAUTION
If bearing metal particles are found on the element or in the shell, the source should
be determined before a failure.
CAUTION
Determine source of moisture, internal leaks, defective seals, gaskets, etc.
(iii) Fill the new filter with clean lubricating oil before installation.
(i) Apply a light coating of lubricating oil to the gasket sealing surface and install the
filter.
DO NOT over tighten the filter.
Lubrication System
Figure 2
e Clean the drain plug and install when engine oil has completely drained. Torque the drain
plug to 44 foot-pound (60 Nm).
Oil Level Check
Oil Fill