Hobart 60CU24, Operation And Maintenance Manual With Illustrated Parts List, Page: 146 / 234

OM-2098C / Operation and Maintenance Manual
60CU24 / Series 500060C / 400 Hz. Generator Set
April 01, 2005 Chapter 3-3
Page 2
(4) Remove the 5/8 - 11 x 4-1/2 bolts generator-to-flywheel coupling bolts.
(5) Detach the generator housing from the engine. Do this by removing the six M10 - 1.5 x 35 metric
bolts.
(6) Carefully lift and separate the generator from the engine.
Hoist
Lifting Eye
Generator
Generator Lifting Arrangement
Figure 1
3) Generator Assembly Installation
Installation of a generator assembly is essentially a reversal of the procedure for removal of the generator
assembly: the re-mounting of the generator assembly to the frame of the generator set, and the
remounting of the assemblies that were removed to gain access to the generator assembly. To install the
generator assembly, refer to Connection Diagram, and proceed as follows:
a) Remounting the Generator Assembly
(1) Support engine at flywheel housing with wooden blocks, or second hoist if available.
(2) Using the hoist, support the generator assembly and lower it carefully and slowly into position for
attachment to the engine.