Hobart 60CU24, Operation And Maintenance Manual With Illustrated Parts List, Page: 56 / 234

OM-2098C / Operation and Maintenance Manual
60CU24 / Series 500060C / 400 Hz. Generator Set
April 01, 2005 Chapter 2-1
Page 6
d Check for Leaks and Correct
At each daily start-up, check for coolant, fuel, and oil leaks. Coolant leaks may be more
noticeable when components are cold. Observe pumps, hoses, fittings, gasket connections,
etc., for signs of leakage. Correct as required.
Fuel Filter and Drain
Figure 2
e Check Air Cleaner Indicator
At each daily start-up, observe the air cleaner indicator light. If this light comes ON , it
indicates that the air cleaner should be changed.
f Check Exhaust System
Visually inspect muffler and exhaust pipes for rust and signs of approaching failure. Listen for
any gasket or joint leaks.
WARNING
A leaking and defective exhaust system could be a fire hazard.
(2) Electrical System (12 VDC)
a Check All Lights
Check all indicating lights to be sure they will operate when they should. If any light fails to
operate, check both the lamp and its protective circuit breaker. Figure 5 lists all lamps with
their location and part number. Figure 6 lists all circuit breakers.
Fuel Drain