HMS ZM1901, Manual Instruction

Page: 20 / 61

5) Attach the Rear Stabilizer (3) to the Rail (8) with
two M8 x 20mm Screws (14) and two M8
x20mm Washers (16).
6) See the inset drawing. Route the end of the Bungee
Cord (45) around the Small Pulley (5) on the Rear
Stabilizer (3) as shown. Make sure that the Bungee Cord
(45) is not twisted. Attach the Bungee Clip (97) to the
indi- cated hole in the Rail Attachment Bracket (43).
7) Attach the Rear Stabilizer Cover (2) to the Rear
Stabilizer (3) with an M5 x 10mm Screw (101).
8) Orient the Rail Cover (18) as shown. Attach the Rail
Cover (18) to the Rail (8) with
four M5 x 8mm Screws (12).