manualshive.com logo in svg

HMS Netbiter EasyConnect EC150, User Manual, Page: 7 / 70

Share
Download
HMS Netbiter EasyConnect EC150 User Manual Download Page 7

Doc.ID. HMSI-168-92

Netbiter EasyConnect 
Doc.Rev. 2.10

Preface

P. About This Document

For more information, documentation etc, please visit the HMS web site www.netbiter.net.

P.1 Related Documents

P.2 Document History

Revision List

P.3 Conventions & Terminology

The following conventions are used throughout this manual:

• Numbered lists provide sequential steps
• Bulleted lists provide information, not procedural steps

Glossary

P.4 Support

For contact information and support, please refer to the contact and support pages at 
support.netbiter.com

Document

Author

Netbiter Argos User Manual

HMS

Installation Guides for Netbiter EasyConnect Gateways

HMS

Revision

Date

Author(s) Chapter(s) Description

2.10

January 2014

SDa

Multiple

Removed EC150-M. Removed info on relay in EC150.

2.00

November 2013 SDa

Multiple

Added EC350.

1.1

Mar 2013

SDa

9 

New chapter on Ethernet installation.

1.0

Nov 2012

SDa

First official release.

Word

Definition

Device

A piece of equipment connected to a Netbiter EasyConnect Gateway.

Field system

A Netbiter EasyConnect Gateway with connected devices.

Device template

A file describing the Modbus parameters for a connected device.

Device profile

Contains a device template (see above), but also provides dashboards, visualizations, logs,
alarms, and various gateway settings, to offer a complete interface for the user. See the 
Netbiter Argos Administration Manual for further details.

Synchronize

Whenever a configuration is added or changed in Netbiter Argos, the changes must be syn-
chronized with the Netbiter EasyConnect Gateway. 

Summary of Contents for Netbiter EasyConnect EC150







































































Reviews:

No comments