LED Indicators
27
Doc.ID. HMSI-168-92
Netbiter EasyConnect
Doc.Rev. 2.10
5.1.3 Activity/Collision LED
Flashing green:
Receiving Ethernet packet
Flashing red:
Ethernet Collision detected
5.1.4 Ethernet Link LED
Steady green:
10 Mbps Ethernet network detected
Steady orange:
100 Mbps Ethernet network detected
5.2 Netbiter EasyConnect EC220
5.2.1 Power LED
Steady green on the Power LED indicates that Netbiter EasyConnect EC220 is powered up and
running.
5.2.2 Status LED
The Status LED indicates the following conditions, in 4-second cycles.
Unlit (No Flashes): Normal Operation
1 Red Flash: Not Registered on Home Network.
The Netbiter SIM card will automatically connect to a network that is part of the worldwide network of
tele-operators in the HMS “home network”. For a list of worldwide partners, please see the support pag-
es for Netbiter Argos at http://support.netbiter.com
If there is good signal strength, but the unit still shows “not registered on home network”, then there
may be another network operator with better GPRS signal strength in this location. Check also that the
antenna is mounted and that the SIM card is inserted correctly. Ensure that the mobile network has cov-
erage at the location where you are using the device. An external antenna can be used to improve recep-
tion.
2 Red Flashes: Problem with Network Settings.
Check that the Access Point Name (APN) is set for the SIM card being used. When entering the APN,
it is recommended that is done from Netbiter Argos (for Netbiter EasyConnect EC220, this is the only
option). Otherwise the APN might only be stored locally in the unit, which can cause problems when
LED
Indicates
Power
Power to unit
Status
Connection to Netbiter Argos
Running
Normal operation
GSM signal
Signal strength