LED Indicators
31
Doc.ID. HMSI-168-92
Netbiter EasyConnect
Doc.Rev. 2.10
5.4 Netbiter EasyConnect EC350
Note that while the unit is booting up, all the LED:s except the Power LED will show orange.
5.4.1 RS485 / RS232 LED
These two LED:s indicate the status of the serial ports, according to the following:
OFF: Port not in use
Steady red: Port not available
Contact HMS support.
Steady green: Port is configured for use.
5.4.2 Uplink/WAN LED
This LED indicates the status of the connection to Netbiter Argos/Internet.
Steady green: Connected to Netbiter Argos
One orange flash: No IP address
• For dynamic IP address - check for DHCP server on network.
• For fixed IP address - check the set IP address.
Two orange flashes: No connection to Argos/Internet
Check all network settings (gateway, DNS servers, netmasks, etc) and firewalls.
LED
Indicates
RS485
Status for RS-485 port
RS232
Status for RS-232 port
Uplink/WAN
Connection status via WAN port
Modem
Modem status, including signal strength
Gateway
System status
Power
Indicates when unit has power
Ethernet Link
(on RJ45 socket)
Network speed
