Local Configuration
54
Doc.ID. HMSI-168-92
Netbiter EasyConnect
Doc.Rev. 2.10
10.4 Log in to Netbiter EasyConnect EC350
10.4.1 Select Login Method
The Netbiter EasyConnect EC350 supports local access via the Ethernet connector and the USB
connector.
USB
Connect a USB Micro B cable between the computer and the Netbiter EasyConnect EC350. After the
device driver is installed, a virtual network card will automatically be created on, as in the example below.
It will then be possible to log in to the unit via a web browser, at the IP address
169.254.200.200
, see
below. Note that this IP address applies only to the USB connection.
Ethernet Connection
Connect an Ethernet cable to the
WAN
socket on the Netbiter EasyConnect EC350, and then log in to
the unit via a web browser. If the IP address is not known, it will first be necessary to obtain this infor-
mation. See section 10.1.1 on page page 47 for details on how to do this.
10.4.2 Login
Typing in the IP address as the URL in a web brows-
er will display the login screen. The default user
name is
admin
, and the password is the activation
code supplied with the unit - see section 8.2.1.
