Connections
24
Doc.ID. HMSI-168-92
Netbiter EasyConnect
Doc.Rev. 2.10
4.4.5 GPS Antenna Connector
The Netbiter EasyConnect EC350 includes a built-in GPS receiver. An external GPS antenna should be
connected to the female SMA screw connector on the underside of the unit. This socket also provides
power for active GPS antennas.
4.4.6 Micro USB Connector
This connection can be used to connect the Netbiter EasyConnect EC350 to a PC, to upgrade the
firmware, or to troubleshoot problems. For further information, see section 10.4.
4.4.7 SIM Card Slot
Netbiter SIM Card
When using a Netbiter SIM card (supplied by HMS), the card is configured and ready for use, and the
PIN code security function has been disabled.
Other SIM Cards
To use any other SIM card, the following information is required:
• The phone number for the SIM card.
• The Access Point Name (APN) to connect to, as well as the user name/password, if required by
the network operator.
Important!
- There is no support in the Netbiter EasyConnect EC350 for using a PIN code on
the SIM card. For a SIM card with an active PIN code, the code must first be deactivated by
inserting the card into a mobile/cell phone and performing the operation there. The PIN code
cannot
be deactivated in the Netbiter EasyConnect EC350.
Insert The SIM card
The SIM card shoud be pushed into the slot
provided on the top side of the unit. The
side of the SIM card with the gold plating
should face upwards, and the end with the
cut corner should be inserted first. When the
card is fully inserted it will lock into position.
To extract the SIM card, simply press again
to release.
Inserting/changing the SIM card will
cause the information from the SIM card to be transmitted to Netbiter Argos.
SIM card slot
Micro USB connector