HME Clear-Com ARCADIA Series, User Manual

Page: 115 / 171

User Guide | Arcadia® Central Station
Note: You need to Save the IP address (right call button).
Remote stations and speaker stations
1. Press the Menu button to enter menu mode.
2. Using the rotary controls, navigate to Networking>Pair to Station .
3. Select either;
n
Pair by Name and select the name of Arcadia
n
Pair by IP and enter the IP address of Arcadia’s HelixNet Network using the rotary
controllers
Note: All devices will automatically update on connection if a difference in firmware versions is
detected.
Using HelixNet user stations on Arcadia
Once the HelixNet user station is connected to the Arcadia and the firmware updated if
necessary, the HelixNet user station can be configured.
Arcadia’s default configuration assigns the first channels of the system to the HelixNet user
stations on connection.
HelixNet user stations can be operated in Local Config . In this case, the user station is fully
configured from its front panel menu. Any of the connected Arcadia’s HelixNet enabled
channels can be assigned to the keysets of the user station.
Where central management is required, Roles can be created in the Arcadia’s CCM and then
assigned to the HelixNet user station, either from the CCM’s Hardware> [Endpoint] >Properties
or in the front panel menu of the user station. A role is a configuration of the keysets and settings
of the user station. Multiple HelixNet devices can share a role and any role changes will be
updated in real time.
l
Create roles for your devices. See Managing Roles on page 74
For HelixNet manuals and other resources see:
The HelixNet Knowledge Center on the Clear-Com website.
Page 115