Options of the HM-S linear modules and HT-S linear tables
21
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
4.6 Drive interfaces
Fig. 4.8
Drive interfaces of the HM-S and HT-S linear axes
On the HM-S and HT-S linear axes, the drive is mounted in the spindle extension. Depending on the motor, delivery includes
a coupling housing, a matching coupling, and an adapter plate for the motor. If fitted with a belt drive, the motor may also be
swivelled through 180°, reducing effectively the overall length of the HM-S and HT-S linear axes.
Possible drive interfaces:
N
S
L
R
A
B
N: None
S: Straight
L: Left
R: Right
A: Top
B: Bottom
4.7 Motor
When using HIWIN servo motors and/or drives, consult the information at www.hiwin.de:
Assembly and commissioning instructions “D2 Servo Drive”
Catalogue „Drives and Servo Motors“
4.8 Spindle support
With long strokes at high speeds, the HM-S and HT-S linear axes can reach the critical spindle speed. These must then be
supported accordingly. HIWIN linear modules HM-S (with the exception of the HM040S) allow up to three optional spindle
supports to be fitted on each side of the carriage. Up to four spindle supports are possible with the HT-S linear tables. The
critical speeds for spindle support can be taken from the catalogue “Linear Axes and Axis Systems HX”.
Summary of Contents for HM-S
Page 99: ......
