48
Assembly and connection
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
L
2
6.7.2 Mounting the motor
Attach the motor adapter plate AM so that it lies flat. In doing so, note the position of the hole for the clamping hub’s
clamping bolt.
Tighten the four bolts. See Table 6.20 for the tightening torques.
KB
AM
Table 6.19
Adjusting the coupling distance based on measurement L
2
when there is no coupling housing
Size
Screw strength class
Thread size
Screw tightening torque [Nm]
HT100S
8.8
M5
5.9
HT150S
8.8
M6
10.1
HT200S
8.8
M6
10.1
HT250S
8.8
M8
24.6
If the coupling is mounted without a coupling housing, the coupling distance L
2
must be set in accordance with
NOTE
Fig. 6.45
Total length of coupling assembly (HT-S)
Axis type
L
2
[mm]
HT100S
34
HT150S
32
HT200S
50
HT250S
58
Table 6.20
Tightening torques for the motor adapter plate AM
Fig. 6.46
Mounting the motor adapter plate AM
Summary of Contents for HM-S
Page 99: ......
